| | |
 | Quikshift Threaded Pin Kit(Reference #815-QSPINKIT) FOR SKI-DOO TRA II, III & V CLUTCHES Economical performance upgrade for faster accelerationTwo sizes to fit both high and low altitude applicationsCoated steel pinsUp to 13 different weight combinationsKits contain set of 3 pins, adjustment screws, cotter keys and instructions
|
| |
Threaded Pin Kit (Reference #815-503) $37.95 | 4.5 to 9.5 GRAM (aluminum) 3 In Stock
| |
Threaded Pin Kit (Reference #815-504) $37.95 | 10.5 to 15.5 GRAM 5 In Stock
| |
Threaded Pin Kit (Reference #815-505) $42.95 | 14.3 to 20.1 GRAM 2 In Stock
| |
|
Heavy Adjustable Pin Kit(Reference #815-PINKIT) FOR SKI-DOO TRA CLUTCH
Allows wide range of adjustment.
|  |
| |
Adjustable Pin Kit (Reference #815-501) $30.95 Instruction Sheet | 13.6 to 18.6 GRAM 2 In Stock
| |
Adjustable Pin Kit (Reference #815-502) $30.95 Instruction Sheet | 11.2 to 16.2 GRAM 3 In Stock
| |
|
 | TRA Retainer Clips(Reference #725-415) Holds clutch buttons in place during assembly and dis-assembly. Set of 3
6 In Stock $14.95
|
| |
|
 | Thunder Shift Rollers - Ski Doo TRA(Reference #TSR) FOR SKI-DOO TRA CLUTCHESGreat tuning component for stock TRA arms or Thunder Shift ArmsRollers are heat treated, bushed and ISR stock legalTwo sizes for fine tuning. 1mm oversize (12.5 grams each) or 2mm oversize (15.5 grams each). Stock Ski-Doo rollers are 10.0 grams.Sold in sets of 3
|
| |
TSR0 Rollers (Reference #TSR-0) $75.95 | Standard Size 3 In Stock
| |
TSR1 Rollers (Reference #TSR-1) $75.95 | 1mm Oversize 0 In Stock
| |
TSR2 Rollers (Reference #TSR-2) $75.95 | 2mm Oversize 7 In Stock
| |
|
Thunder Shift Rollers - Yamaha(Reference #TSR-Y) FOR YAMAHA CLUTCHES
Tuning component for stock clutches or when using Heavy Hitter Arms.
Hardened steel rollers are bushed and ISR stock legal.
Smaller size increase force of cam arms, larger size decreases force.
More economical than helixes with more consistent results.
Fits all late model Yamahas with 9mm ID (SRX, Viper, Venom, Rage, RX-1, Warrior, Vector, Mtn models and new 06 models)
Sold in sets of three with installation instructions.
|  |
| |
YAR148 Rollers (Reference #YAR148) $75.95 | 14.8mm 2 In Stock
| |
YAR158 Rollers (Reference #YAR158) $75.95 | 15.8mm 1 In Stock
| |
|
 | Thunder Shift Arms(Reference #TSA) FOR SKI-DOO TRA II, TRA III AND TRA V CLUTCHESPatented weight distribution method is designed to “get the power to the ground”ISR stock legal with no clutch machining required & allows full use of clicker adjustmentsBushed aircraft billet aluminum arms are up to 5 times stronger than stockGram weight matched sets available in two sizes to fit all engines. Standard weight (similar to stock) and light weight which is 7 grams lighter than standardFully adjustable in low and mid range, optional threaded pins allow top end tuningBetter acceleration and faster backshift for unequaled performanceFull fastener kit allows adjustment resolution down to 0.4 grams, like having hundreds of ramp profiles to get the perfect shift curveSold in set of 3 arms with tuning fasteners and easy to understand tuning manual
|
| |
Thunder Shift Arms (Reference #TS-290) $275.95 | TRA - Light (top photo) 6 In Stock
| |
Thunder Shift Arms (Reference #TS-295) $275.95 | TRA - Std (bottom photo) 3 In Stock
| |
Thunder Shift Arms (Reference #TS-395) $275.95 | TRA III 2 In Stock
| |
Thunder Shift Arms (Reference #TS-495) $284.95 | TRA V (steel arms) 2 In Stock
| |
|
Wide Range Thunder Shift Pin Kit(Reference #200-933) Offers the widest range of pin weight combinations on the market
One kit allows pin weight adjustment from 3.8 to 25 grams
.2 to .4 gram increments allows tuning any engine at any altitude
Great addition to Heavy Hitter TRA Arms for maximum performance
Fits TRA II, III or V clutches
Kit includes 6 pins, fasteners, wrenches, installation instructions and tuning guide
4 In Stock $94.95
|  |
| |
|
Ski-Doo Ramps(Reference #SD-RAMP) Sold per set
|  |
| |
|
| TRA 2 Ramps Sold per set. |
Ski-Doo Ramp (Reference #950-001) $94.95 | Compares to 297 0 In Stock
| |
Ski-Doo Ramp (Reference #950-002) $94.95 | Compares to CF1 0 In Stock
| |
Ski-Doo Ramp (Reference #950-003) $94.95 | Compares to 280 0 In Stock
| |
Ski-Doo Ramp (Reference #950-004) $94.95 | Compares to PX 4 In Stock
| |
|
| TRA 3 / TRA 5 Ramps Sold per set |
Ski-Doo Ramp (Reference #950-015) $94.95 | Compares to 414 0 In Stock
| |
Ski-Doo Ramp (Reference #950-016) $94.95 | Compares to 427 1 In Stock
| |
Ski-Doo Ramp (Reference #950-017) $94.95 | Compares to 410 2 In Stock
| |
Ski-Doo Ramp (Reference #950-011) $94.95 | Compares to 412 1 In Stock
| |
Ski-Doo Ramp (Reference #950-010) $94.95 | Compares to 419 0 In Stock
| |
Ski-Doo Ramp (Reference #950-012) $94.95 | Compares to 433 0 In Stock
| |
|
| TRA 3/TRA 5 Custom Ramps Sold per set. |
Ski-Doo Custom Ramp (Reference #950-013) $94.95 | Similar to 434 ramp, however #950-013 has a .040 laid down end to produce more mph. 0 In Stock
| |
Ski-Doo Custom Ramp (Reference #950-005) $94.95 | Aggressive trail ramp for 600, 800, 800 HO
Use with #200-938 spring for best results on 800
1 In Stock
| |
Ski-Doo Custom Ramp (Reference #950-006) $94.95 | Trail Upgrade ramp for 600, 800, 800 HO 2 In Stock
| |
Ski-Doo Custom Ramp (Reference #950-007) $94.95 | Drag race ramp for 1000 Mach Z 0 In Stock
| |
Ski-Doo Custom Ramp (Reference #950-008) $94.95 | Trail upgrade ramp for 1000 Mach Z
Use with #200-925 spring for best results
1 In Stock
| |
Ski-Doo Custom Ramp (Reference #950-014) $107.00 | Dalton DTR-1 Ramp
Performance ramp for 1000 Mach Z
0 In Stock
| |
|
 | Dalton Pro Ultimate Stainless TRA Pins(Reference #815-506) Heat Treated 17 - 4 stainless outer housing is high strength and precision CNC machined for exact fit and ultra smooth, hard, corrosion free surface. Some other heavy pins are made from exotic metals that are brittle, have poor machinability and surface finish and cause excessive wear on the roller bushings. Weight adjustable 14.5 to 25 grams! With these pins the weight is alway centralized for balance and not loaded to one end. Fully clicker adjustable! Many adjustable pins above 21g must remain in #4 or higher for clearance of the governor cup. Dalton Pro Ultimate Stainless pins can be use in ANY CLICKER POSITION allowing much more flexibility when clutch tuning.
12 In Stock $109.95
|
| |
|
Optional SHD Insert For 27 Gram(Reference #815-507) $59.95
2 In Stock |
|
This in an Optional SHD Insert for 27 gram on above pins. Set of 3.
|
|
Dalton Pro Midweight TRA Pins(Reference #815-510) The mid-weight pins are manufactured from high quality billet alloy steel and through hardened and tempered to our specifications. Adjustable from 14.5 to 20.4 grams and they can be used in any clicker position. A new level of quality and adjustability for pins in this price range.
8 In Stock $31.95
|  |
| |