| | |
 | Nitrogen Charge Kit(Reference #155-364)
Contains regulator, hose and inflation needle and gauge assembly. Everything you need to connect to your nitrogen bottle.
2 In Stock
$269.95
|
| |
|
Inflation Needle & Gauge Assembly(Reference #155-350)
300 pound capacity
2 In Stock
$99.95
|  |
| |
|
 | Replacement Needle Assembly(Reference #155-365)
Replacement for bent or broken needles. Comes as a complete safety unit.
2 In Stock
$65.95
|
| |
|
 | Gas Fill Tool & Gauge(Reference #3903GAUGE)
RydeFX's rebuildable gas fill tool can easily be disassembled a reassembled for needle replacement using standard wrench sizes. Gas fill tool comes standard with pressure gauge and 5 pack replacement needles. Compatitble with FOX and Arctic Cat ACT shocks. 400 pound capacity. 20 pack of replacement needles are also available.
|
| |
Gas Fill Tool & Gauge
(Reference #390300)
$179.95 | Gas Fill Tool & Gauge
2 In Stock
| |
Replacement Needles
(Reference #390301)
$32.95 | 20 Pack Needles
4 In Stock
| |
|
Inflation Gauge & Valve Assembly(Reference #155-374)
For shocks with Schrader valves
2 In Stock
$83.95
|  |
| |
|
 | Shock Gauge and Filler(Reference #08-0072)
For shocks with Schrader Valves
300 psi capacity
Bleeder valve and T-handle plunger pin chuck
Swivel chuck has a 12" flexible hose
Instructions, carrying box and Schrader valve extension included
5 In Stock
$167.95
|
| |
|
Needle Kit(Reference #08-0075)
Nitrogen needle is used to fill shocks with self-sealing rubber valves
Use with Shock Gauge above (08-0072)
2 In Stock
$24.95
|  |
| |
|
Replacement Needle Only(Reference #08-0B75)
$4.95
7 In Stock |
|
For Needle Kit #08-0072 above.
|
|
Seal Protector(Reference #SEALPROT)
A bullet shaped tool used to install the bearing cap without damaging the seals.
|  |
| |
Seal Protector
(Reference #155-363)
$12.95 | 1/2"
3 In Stock
| |
Seal Protector
(Reference #155-912)
$12.95 | 5/8"
4 In Stock
| |
Seal Protector
(Reference #155-913)
$12.95 | 12.5mm (HPG & Kayaba)
3 In Stock
| |
|
 | Seal Lubricant(Reference #155-911)
This 1.5 gram packet of synthetic dielectric lubricant is a Silicone/Teflon blend used for shock rebuilding, electrical connections and anywhere lubrication is needed.
33 In Stock
$1.00
|
| |
|
Pik Set(Reference #155-367)
Set of 2 special brass tools to remove old seals and o-rings
4 In Stock
$10.95
|  |
| |
|
 | Body Holding Tool(Reference #BODYHOLD)
Used to hold shock, without damage, in a vice for service work.
NOTE: Always verify your shock body diameter
|
| |
Holding Tool
(Reference #155-320)
$29.95 | 1.625"
Standard Fox & ACT
Some Walker Evans
13 In Stock
| |
Holding Tool
(Reference #155-323)
$29.95 | 1.675"
Fox Zero Pro
Some HPG & Kayaba
4 In Stock
| |
Holding Tool
(Reference #155-321)
$29.95 | 2.00"
Some PPS, Fox
Linked Shock
4 In Stock
| |
|
Shaft Holding Tool(Reference #SHAFTHLD)
Used to hold the shaft while replacing eyelets.
|  |
| |
Shaft Holding Tool
(Reference #155-325)
$22.50 | 1/2" or 12.5mm
5 In Stock
| |
Shaft Holding Tool
(Reference #155-328)
$22.50 | 5/8" or 16mm
1 In Stock
| |
|
 | IFP Depth Tool(Reference #155-372)
Genuine Fox tool used to set the internal floating piston depth. Use with caliper for exact IFP depth measurements.
0 In Stock
$89.95
|
| |
|
Fox Spanner Wrench(Reference #155-322)
Fox tool to adjust spring tension on shocks with threaded adjusters.
7 In Stock
$5.95
|  |
| |
|
 | Spanner Wrench(Reference #810-300)
Used for adjusting the suspension shock's cam spring to increase or decrease spring pre-load.
0 In Stock
$15.95
|
| |
|
 | Synthetic Fox Shox Oil(Reference #FOXSYNOIL)
Formulated using the most advanced fully synthetic base fluids to provide consistent performance throughout extreme temperature conditions. 7 wt. Additional handling applies - $2 per quart and $5 per gallon (reflected in price)
|
| |
Synthetic Fox Shox Oil - Quart
(Reference #155-501)
$23.95 | QUART
0 In Stock
| |
Synthetic Fox Shox Oil - Gallon
(Reference #155-511)
$90.95 | GALLON
0 In Stock
| |
|
Genuine Fox Shox Oil(Reference #FOXOIL)
Additional handling applies - $2.00 per quart / $5 per gallon (reflected in price)
|  |
| |
Fox Shox Oil
(Reference #155-500)
$12.95 | Quart
4 In Stock
| |
Fox Shox Oil
(Reference #155-510)
$42.95 | Gallon
2 In Stock
| |
|
 | High Performance Fox Shox Oil(Reference #FOXPRFOIL)
2 years of testing and development. Fox High Performance Oil is preferred by snocross racers. Non fade formula - fast, easy air bleed. Additional handling applies - $2.00 per quart / $5 per gallon (reflected in price).
|
| |
Fox Shox Oil
(Reference #155-515)
$14.50 | Quart
2 In Stock
| |
Fox Shox Oil
(Reference #155-520)
$49.95 | Gallon
3 In Stock
| |
|
Comet Shock Seal Kit(Reference #400149)
Click here for a Reference Guide
1 In Stock
$26.10
|  |
| |
|
Shock Cover(Reference #SHOCK-CVR)
PRO SERIES
Durable 600D coated nylon construction
Stretch elastic to secure bottom but allows for drainage
Neoprene seal on top with velcro strap to secure tightly
Full length velcro seam located on back to make installation easy
10" wide x 14" tall
Fits coil over and Fox float shocks.
Sold per pair
|  |
| |
Shock Cover
(Reference #114-405)
$37.95 | BLACK
1 In Stock
| |
Shock Cover
(Reference #114-406)
$37.95 | RED
0 In Stock
| |
Shock Cover
(Reference #114-407)
$37.95 | YELLOW
4 In Stock
| |
|
 | Shock Covers(Reference #PMSHOCK-CVR)
Protects shocks from dirt and debris
Made from durable 600D Nylon with extra wide hook-n-loop closures and vent holes
Small covers fit springs up to 3" diameter x 11" long
Large Covers fit springs up to 3" diameter x 13" long
Sold individually
|
| |
Shock Covers
(Reference #14263)
$9.95 | SMALL
4 In Stock
| |
Shock Covers
(Reference #14264)
$9.95 | LARGE
2 In Stock
| |
|
Shock Shafts(Reference #155-SHAFTS)
FOX and ACT 1/2" stainless steel. Available in several lengths. LENGTH SHOWN IS THE OVERALL LENGTH OF THE SHAFT.
|  |
| |
Shock Shaft
(Reference #155-530)
$29.95 | 6.8"
4 In Stock
| |
Shock Shaft
(Reference #155-531)
$29.95 | 7.45"
3 In Stock
| |
Shock Shaft
(Reference #155-532)
$29.95 | 7.525"
5 In Stock
| |
Shock Shaft
(Reference #155-533)
$29.95 | 7.6"
2 In Stock
| |
Shock Shaft
(Reference #155-534)
$29.95 | 7.93"
2 In Stock
| |
Shock Shaft
(Reference #155-535)
$29.95 | 8.0"
3 In Stock
| |
Shock Shaft
(Reference #155-536)
$29.95 | 8.35"
0 In Stock
| |
Shock Shaft
(Reference #155-537)
$29.95 | 9.125"
1 In Stock
| |
|
 | Billet Spring Retainer(Reference #155-375)
Direct replacement for stock cast aluminum retainers that are famous for breaking. Fits Fox Shox on Polaris and Arctic Cat applications and ACT shocks. Sold individually.
0 In Stock
$14.75
|
| |
|
 | Shock Ride Height Spacer(Reference #155-SRHS)
FOR 1/2" SHAFT SHOCKS. Piston spacers for Comet, ACT & Fox shocks are a simple method of shortening the eye-to-eye measurement of the shock to lower the ride height of the sled for drag, speed run, or oval racing. The spacers can be stacked to adjust height reduction.
|
| |
|
| Ride Height Spacer for 1/2" Shaft Shocks |
Spacer
(Reference #155-369)
$3.50 | 1/2" Thick
22 In Stock
| |
Spacer
(Reference #155-370)
$4.25 | 1" Thick
2 In Stock
| |
