| | |
 | Mikuni Carburetors (Reference #MIKCARB)
Mikuni carburetors are well known in the snowmobile industry for their easy tuning and good performance characteristics. These carbs have tuning components to control fuel flow at any throttle opening.
|
| |
VM34 Carburetor
(Reference #300-215)
$114.00 | VM34
2 In Stock
| |
VM38 Carburetor
(Reference #300-202)
$141.00 | VM38
0 In Stock
| |
VM44 Carburetor
(Reference #200-203)
$188.00 | VM44
0 In Stock
| |
|
 | Carburetor Tool Kit(Reference #200-210)
Handy tool kit includes all tools necessary to completely disassemble carb, change jets, etc. Tool pouch has compartment to carry spare pilot and main jets. GENUINE MIKUNI
5 In Stock
$34.95
|
| |
|
VM40-44 Slide Valves(Reference #237-VALVE)
GENUINE MIKUNI - The following slide valves fit Mikuni VM40-7 and VM44-7 carburetors plus many other VM40 and VM44 carbs. The idle screw location is on the left side (when looking at the slide from the cutaway side) and the guide pin groove width is 3.05mm. The slide material is aluminum.
|  |
| |
1.0 Carb Slide
(Reference #237-4010)
$44.95 | 1.0 CUTAWAY
0 In Stock
| |
1.5 Carb Slide
(Reference #237-4015)
$44.95 | 1.5 CUTAWAY
0 In Stock
| |
2.0 Carb Slide
(Reference #237-4020)
$44.95 | 2.0 CUTAWAY
0 In Stock
| |
2.5 Carb Slide
(Reference #237-4025)
$44.95 | 2.5 CUTAWAY
2 In Stock
| |
3.0 Carb Slide
(Reference #237-4030)
$44.95 | 3.0 CUTAWAY
0 In Stock
| |
3.5 Carb Slide
(Reference #237-4035)
$44.95 | 3.5 CUTAWAY
0 In Stock
| |
|
 | Mikuni Carburetor Flange(Reference #FLANGE)
Supplied with clamp. Center to center bolt hole measurement is 2.94"
|
| |
Carb Flange
(Reference #300-213)
$18.80 | FOR VM30,32,34
0 In Stock
| |
Carb Flange
(Reference #300-203)
$22.95 | FOR VM36,38
6 In Stock
| |
Carb Flange
(Reference #200-202)
$25.95 | FOR VM40,44
2 In Stock
| |
|
Genuine Mikuni Chokes(Reference #MIKCHOKE)
For VM Type Carbs. Three styles are available - make your choice below.
|  |
| |
Mikuni Choke
(Reference #200-216)
$21.20 | LEVER TYPE
7 In Stock
| |
Mikuni Choke
(Reference #200-217)
$18.95 | BUTTON TYPE
3 In Stock
| |
Mikuni Choke
(Reference #200-218)
$12.95 | CABLE TYPE
(does not include cable)
6 In Stock
| |
|
| Genuine Mikuni Bowl Parts |
Float Bowl Gasket
(Reference #6505-030)
$4.00 | VM30-34
14 In Stock
| |
Float Bowl Gasket
(Reference #6505-197)
$4.00 | VM36-44
5 In Stock
| |
Bowl Plug Gasket
(Reference #6505-112)
$1.50 | (Brass Plug)
14 In Stock
| |
Bowl Plug Gasket
(Reference #6505-106)
$1.50 | (Zinc Plug)
2 In Stock
| |
Bowl Plug O-Ring
(Reference #6505-243)
$1.95 |
5 In Stock
| |
Inlet Washer
(Reference #6505-102)
$2.68 |
11 In Stock
| |
Brass Bowl Plug
(Reference #6505-587)
$11.40 |
0 In Stock
| |
Zinc Bowl Plug
(Reference #6505-105)
$4.50 | (VM40-44)
4 In Stock
| |
|
 | Carb Covers(Reference #CARBCVR)
Carb covers will keep dirt and debris from getting into your carbs or engine. Perfect for storage, trailering or any time the engine is not running. If you run open carbs, protect your investment with carb covers.
|
| |
Black Carb Cover
(Reference #210-101)
$3.45 | BLACK
VM40,42,44,46 Round Slide
Others with 2 3/4" air horn
0 In Stock
| |
Red Carb Cover
(Reference #210-201)
$3.45 | RED
VM40,42,44,46 Round Slide
Others with 2 3/4" air horn
0 In Stock
| |
Black Carb Cover
(Reference #210-105)
$3.45 | BLACK
VM38.39.5 Round Slide
VM38,40,42 Flat Slide
Others with 2 1/2" air horn
20 In Stock
| |
Red Carb Cover
(Reference #210-205)
$3.45 | RED
VM38.39.5 Round Slide
VM38,40,42 Flat Slide
Others with 2 1/2" air horn
0 In Stock
| |
|
Choke Cable Lever Kit(Reference #LEVERKIT)
Choke lever replacement kit for Mikuni choke controls.
|  |
| |
Choke Lever Kit
(Reference #410-300)
$1.95 | Single & Twin Cylinder
9 In Stock
| |
Choke Lever Kit
(Reference #410-299)
$2.65 | Triple Cylinder
5 In Stock
| |
Choke Lever Kit
(Reference #410-298)
$3.50 | Yamaha - All 1984-97
(except V-Max & Mtn Max)
4 In Stock
| |
