| | |
 | Handlebar Tach Bracket(Reference #HBTACH-BKT)
Designed for sleds with aftermarket hoods. Locates tach high and easy to see.
|
| |
Handlebar Tach Bracket
(Reference #900-508)
$33.95 | ARCTIC CAT M SERIES
'05 & newer
1 In Stock
| |
Handlebar Tach Bracket
(Reference #900-510)
$33.95 | ARCTIC CAT '96 & newer
& POLARIS '97 & newer
(with 4.5" tach)
0 In Stock
| |
Handlebar Tach Bracket
(Reference #900-509)
$33.95 | POLARIS IQ CHASSIS
'05 & newer
1 In Stock
| |
Handlebar Tach Bracket
(Reference #900-507)
$33.95 | YAMAHA
RX-1, Apex, Vector
'04 & newer
1 In Stock
| |
|
 | HandArmor SX Mounts(Reference #40001)
The cleanest and strongest hand guard mounting system on the market today. HandArmor SX Mounts are machined from billet aluminum and can be used with OEM and aftermarket hand guards. Stop screwing around with threaded rods and invest in quality mounts designed for the Arctic Cat and Polaris race sleds or models without handlebar pads.
2 In Stock
$45.95
|
| |
|
Power Lever - Polaris(Reference #13575)
High-Impact Molded Plastic Brake Lever - Lightweight race proven and tested design. Stronger than the stock lever. An absolute must for optimum control when using handlebar hooks. Retains the functionality of the OEM parking brake! PowerLever is available in black only. Fits Polaris with Hayes brak (Gen II Chassis only).
1 In Stock
$14.95
|  |
| |
|
PowerMadd Handlebar Pads(Reference #HBPADS)
Durable back-printed vinyl
Dense foam internal core
Hook-and-loop closure for easy installation
For use on Motorcycles, ATV's, Snowmoibles and Watercraft
|  |
| |
Handlebar Pad
(Reference #14260)
$9.95 | 10" PAD
1 In Stock
| |
Handlebar Pad
(Reference #14261)
$14.95 | OVERSIZE PAD
1 In Stock
| |
|
 | Handle Balls(Reference #HANDLEBALL)
Ripco® Handle balls fit into the end of a sled's handle bars and mount without removing the existing grip or heaters. Using Ripco® Handle Balls increases leverage on the bars, making turning easier as well as reducing hand fatigue. Provides hand holding power without hitting your knees. Available in a variety of colors, Handle Balls will fit Yamaha, Arctic Cat, Polaris and Ski-Doo models!
|
| |
Handle Balls - Red
(Reference #785-160)
$16.95 | RED
3 In Stock
| |
Handle Balls - Yellow
(Reference #785-149)
$16.95 | YELLOW
5 In Stock
| |
|
 | Knobberz(Reference #785-140)
Knobberz offer steering security and control. For those who don't care to ride with hooks, this is the best thing. They fit standard 7/8" handlebars. Mounting is quick and easy with a positive locking system. Installs in minutes Only available in black.
0 In Stock
$18.95
|
Sold Out For The Season
|
|
Ultra Grips(Reference #200-155)
Ultra Grips are full coverage handlebar grips that cover your hooks and handlebars to provide a comfortable clean-looking constant diameter grip surface. They are designed to slide over the handlebar hook and handlebar, with the stock grips removed. The result is a smooth transition from bar to hook. No ridges or bumps and no issue with color matching. Ultra Grips will fit all OEM bars, and are compatible with stock hand warmers on Polaris, Cat and Ski-Doo. Black in color - sold per pair. 8 1/2" long.
5 In Stock
$18.95
|  |
| |
|
 | Grab Strap(Reference #13588)
Handlebar grab strap with molded rubber handle works great as a side-hilling grab bar for snowmobiles or and extra grab bar for ATV mudding, side-hilling, etc.
Comes with universal mount kit for 7/8" handlebars.
Available in black only
0 In Stock
$28.95
|
| |
|
Power Flexbar(Reference #POWERFLEX)
Flexible Powder/Mountain Grab Bar.
Molded semi-rigid design offers the aggressive mountain rider the best of both worlds.
Retains its shape, so you always know where it is going to be, but is flexible enough to "give" on impact.
Molded ribs and pliable surface make the bar easy to hold onto, even when gloves are wet.
Mounts on all handlebars directly through or around existing handlebar covers. Inline mounting design keeps the FlexBar from rotating on your handlebars. Molded-in mounting lugs are impacted onto an aircraft-grade braided steel cable, which yields vastly superior pull strength over the competition.
Power FlexBar also works great as a child's grab bar when a child is riding in front of an adult, keeping hands away from kill switches and other driver controls.
Instruction Sheet
|  |
| |
FlexBar - Black
(Reference #13580)
$33.95 | BLACK
8 In Stock
| |
|
 | Hand Warmers(Reference #115-HANDWARM)
Made in the USA by Symtec. Under the grip style hand warmers. Heating element installs on handlebar and the grip goes over the top. Three position switch, hi-lo-off. Hi is 24 watts and low is 14 watts. You can switch alone or put both thumb and hand warmers on one switch. Fits snowmobiles (except Yamaha) and ATVs (except Bombardier).
Installation Instructions
|
| |
Hand Warmer - Toggle Switch
(Reference #115-086)
$35.95 | Toggle Switch
17 In Stock
| |
Hand Warmer - Rocker Switch
(Reference #115-088)
$34.95 | Rocker Switch
10 In Stock
| |
|
Handlebar Grip Heater(Reference #115-099)
A heating element that bonds to the handlebar and the grip is installed over. It has a hi-low switch and comes with installation instructions.
Installation Instructions
6 In Stock
$23.95
|  |
| |
|
Handlebar Heaters(Reference #115-HEAT)
INTERNAL CARTRIDGE STYLE.
56 watt / 4.8 amp draw.
Heater works off same power as lights.
Lighting coil should be at least 75 watts for satisfactory performance.
Easy installation.
|  |
| |
Dual Heat Handlebar Heater
(Reference #115-101)
$29.95 Installation Instructions | Dual Heat (hi/low/off)
2 In Stock
| |
Single Heat Handlebar Heater
(Reference #115-100)
$18.95 | Single Heat (on/off)
9 In Stock
| |
|
 | Electric Grips(Reference #115-112)
Universal fit for 7/8" handlebars High-Low-Off switch Snowmobile or ATV
2 In Stock
$35.95
|
| |
|
 | Electric Grips(Reference #115-GRIP)
Heated handlebar grips with high/low power.
Fits any snowmobile or ATV with 7/8" OD bar. Fastens with screws for easy removal.
30 watt high, 20 watt low current draw.
Open Ended Style allows the installation of handlebar hook, mirrors, etc.
|
| |
Black Electric Grips
(Reference #115-092)
$31.95 | BLACK
9 In Stock
| |
Red Electric Grips
(Reference #115-097)
$31.95 | RED
3 In Stock
| |
Black Electric Grips
(Reference #115-103)
$31.95 | BLACK - Open Ended
7 In Stock
| |
|
095 Thumb Warmer(Reference #115-095)
$16.95
0 In Stock |
|
An electric warmer for your throttle or brake lever so you'll never have a cold thumb again! Draws so little electricity that you can run it off any taillight or accessory lead wire - yet keeps your thumb warm even on the coldest days. Installed easily with the help of a small drill, tape and some good glue. Mounts on top of thumb lever. Instructions included.
Installation Instructions |
|
098 Thumb Warmer(Reference #115-098)
$11.95
0 In Stock |
|
This thumb wearmer easily mounts on the back side of your throttle lever. Made to wire in conjunction with handlebar warmer switch or separate switch.
|
|
Thumbs Up Thumb Warmer(Reference #115-090)
Made in the USA by Symtec. The best quality thumb warmer available. Mounts on the back of your throttle lever. Very low current draw. Hi-Low power.
Installation Instructions
9 In Stock
$33.95
|  |
| |
|
 | Handlebar Gauntlet(Reference #114-315)
Heavy nylon outer shell Easy installation Available in black only
9 In Stock
$15.95
|
| |
|
Deluxe Handlebar Gauntlet(Reference #114-316)
Durable Cordura outer shell Fleece lining for added warmth Easy installation Available in black only
0 In Stock
$19.95
|  |
| |
|
 | Handlebar Gauntlet(Reference #895-021)
A pair of these will protect your hands from wind, weather, brush and rocks. They quickly and easily attach to handlebars with hook & loop straps. Constructed of rugged 600 denier polyester material with a thick waterproof coating. Insulated and lined inside for a warm grip. One size fits most ATV's, snowmobilies and motorcycles.
1 In Stock
$20.95
|
| |
|
GripLock Grip Adhesive(Reference #1104-004)
A high strength adhesive specially formulated to bond grips in place without damaging grip material. Perfect for snowmobile, motorcycle or ATV hand grips. 1 oz tube.
11 In Stock
$5.65
|  |
| |
|
Grab On® Grip(Reference #115-GRAB)
This is one tough grip made from super high density neoprene. Closed-cell foam that is designed to absorb vibration and shock. Insulates against cold metal handlebars. Measures 5 3/4" long and fits all 7/8" round handlebars. Lube 'n Glue is also available.
|  |
| |
Grab on® Grips
(Reference #115-120)
$9.95 | Pair of Grips
24 In Stock
| |
Lube n' Glue
(Reference #115-132)
$1.70 | Lube n' Glue
14 In Stock
| |
|
 | Grip(Reference #0117-793)
Only available in black - sold individually.
15 In Stock
$5.78
|
| |
