| | |
 | Exhaust Snow Deflector(Reference #090-02)
When riding in deep snow, the exhaust outlet can become partially plugged causing reduced performance and even bogging. The universal snow deflector creates a trench in the snow allowing free flow for the exhaust. It will fit most snowmobiles. The deflector requires a flat mounting area of 1" x 3 1/2", just forward of the exhaust outlet.
22 In Stock
$12.95
|
| |
|
 | Spark Plug Indexing Washers(Reference #245INDEX)
Have you ever noticed when removing your spark plugs that one side of the tip is burning lean while the other side appears to be rich. Here's why…take a look at your transfer ports, they are all directed to pack the charge on the intake side of your cylinder. When you index your plugs you are aligning the open end of your electrode on your spark plug toward the intake port of your cylinder by using certain thicknesses of washers to achieve this. Gain performance, fuel mileage and plug life. Kit contains sets of 4 different thickness washers and complete instructions. Available for 2 and 3 cylinder - make your choice below.
Installation Instructions
|
| |
Indexing Washers
(Reference #245-500)
$9.95 | TWIN CYLINDER
70 In Stock
| |
Indexing Washers
(Reference #245-510)
$14.95 | THREE CYLINDER
24 In Stock
| |
|
Power Breather(Reference #200-594)
D&D's latest Arctic Cat power accessory. Designed to give carbureted Cats the extra edge to smoke the competition! On some models, the Power Breather can produce gains up to 6 horsepower. Fits all Arctic Cats with tool box top airbox. Carbureted models only - not for EFI. Power Breather is a replacement airbox top with tool box and foam filter air openings. Easy installation. Available in black only. Fits 1997-01 models.
Installation Instructions
2 In Stock
$94.95
|  |
| |
|
Headlight Elimination Kit(Reference #HL-EKIT)
Virtually indestructable, these headlight replacements have and OEM fit and save weight. Comes with everything to install! Vented kits have screens for extra cooling.
Fits 2005-10 M Series & Crossfires
|  |
| |
Headlight Elimination Kit
(Reference #20030)
$37.95 | Non Vented
4 In Stock
| |
Headlight Elimination Kit
(Reference #20030V)
$56.95 | Vented
3 In Stock
| |
|
 | Black Boxx Cold Air Intake System(Reference #50044)
Arctic Cat
Cold air intake system which removes 8 lbs of unwanted weight. Exclusive air mesh filtering and chamber separator to give you filtered and separated cold air from underhood engine heat. Suggested use of fuel management system to correct air/fuel mixture due to increased air flow. A must for any big bore engine and for the serious mountain rider.
Fits: Firecats 2003-06; M Series, Crossfire models 2005-08
7 In Stock
$161.95
|
| |
|
 | Powder Valves(Reference #PDR-VALVE)
These trick flapper valves are installed in the air box to provide additional airflow to the engine. They are activated by air box vacuum. When the stock intake begins to plug in deep powder snow conditions, these valves open to deliver the necessary air flow that the engine demands. This substantially improves consistency when running in deep powder snow conditions. Sold per pair
|
| |
Powder Valves
(Reference #14-134)
$47.95 | Ski Doo Rev XP 800
2 In Stock | |
Powder Valves
(Reference #14-132)
$47.95 | Polaris 600, 700,
800 HO IQ/IQ RMK '06-10
(NOT for Polaris race chassis)
1 In Stock | |
|
Powder Snow Pre-Filter Kit(Reference #14-PFK)
FOR POLARIS IQ RMK & IQ SWITCHBACK
This Powder Snow Pre-Filter kit increases intake surface area for increased performance. It also eliminates the stock foam filters that are prone to falling out. The pre-filter securely fastens to the hood to provide a more positive seal for improved cold air intake with less chance of snow ingestion through intake vents. This kit features a brushed aluminum grate and pre-filter material that repels snow and water, yet maintains high air flow.
|  |
| |
Powder Snow Pre-Filter Kit
(Reference #14-227)
$42.95 | All IQ Models 2005-08
(except 2008 700/800 RMK)
All IQ Touring, FST and 550/600 Shift Short Track 2009-10
23 In Stock | |
Powder Snow Pre-Filter Kit
(Reference #14-229)
$50.95 | All IQ Models 2009-10
(except Touring, FST, 550/600 Shift Short Track and Rush)
700, 800 CFI RMK '08
8 In Stock | |
|
 | Hot Air Elimination Kit(Reference #HAE-KIT)
FOR POLARIS IQ RMK, IQ SWITCHBACK AND FUSION
SLP Hot Air Elimination Kits help reduce underhood hot air to maintain higher horsepower by delivery additional cold air and hot air escape from the chassis. The kit for the left side helps to keep the clutches running cool, which considerably reduces the chance for performance loss due to heat saturation and improves belt life. The kit for the right side helps to reduce underhood heat given off by the exhaust system. Vents have a powder snow pre-filter that repels snow and water, yet allows air to paas through. These vents are sold in kits for the right and left side. Each kit contains one air inlet grate, on outlet grage, reuqired fasteners and detailed instructions.
|
| |
Hot Air Elimination Kit - Left
(Reference #32-522)
$58.95 Instruction Sheet | LEFT SIDE
700, 900 RMK & Switchback
14 In Stock | |
Hot Air Elimination Kit - Left
(Reference #32-534)
$58.95 Instruction Sheet | LEFT SIDE
600 RMK & Switchback
6 In Stock | |
Hot Air Elimination Kit - Left
(Reference #32-528)
$58.95 Instruction Sheet | LEFT SIDE
700, 900 Fusion
8 In Stock | |
Hot Air Elimination Kit - Right
(Reference #32-523)
$58.95 Instruction Sheet | RIGHT SIDE
600,700,900 RMK & Switchback
14 In Stock | |
Hot Air Elimination Kit - Right
(Reference #32-529)
$58.95 Instruction Sheet | RIGHT SIDE
600,700,900 Fusion
6 In Stock | |
|
Hot Air Elimination Kits(Reference #HAE-KIT-M)
FOR ARCTIC CAT M CHASSIS
SLP Hot Air Elimination Kits help reduce underhood hot air to maintain higher horsepower by delivery additional cold air and hot air escape from the chassis. The kit for the left side helps to keep the clutches running cool, which considerably reduces the chance for performance loss due to heat saturation and improves belt life. The kit for the right side helps to reduce underhood heat given off by the exhaust system. Venta have a powder snow pre-filter that repels snow and water, yet allows air to paas through. These vents are sold in kits for the right and left side. Each kit contains a side panel vent and two Flow-Rite Intake Kits
|  |
| |
Hot Air Elimination Kit - Right
(Reference #32-530)
$85.95 Instruction Sheet | RIGHT SIDE
(Except M1000)
3 In Stock | |
Hot Air Elimination Kit - Right
(Reference #32-544)
$85.95 Instruction Sheet | RIGHT SIDE - M1000
1 In Stock | |
Hot Air Elimination Kit - Left
(Reference #32-531)
$85.95 Instruction Sheeet | LEFT SIDE
5 In Stock | |
|
 | Hot Air Elimination Kit(Reference #HAE-REV)
FOR REV CHASSIS
The REV is in desperate need of additional chassis ventilation to eliminate underhood heat build up. This kit effectively forces cold air into the chassis. It then evacuates the hot air out of the chassis.
Rev Chassis Kit (#14-120) Includes: 2 Flow Rite Intakes and air outlet grate with pre filter
Rev XP Chassis Kits (#32-555 & 32-556) Include: Shock tower, upper side panel and outlet vents with pre filter
|
| |
Hot Air Elimination Kit
(Reference #14-120)
$68.95 | Rev Chassis
(EXCEPT RT)
9 In Stock | |
Hot Air Elimination Kit
(Reference #32-555)
$85.95 | Rev XP Chassis
Left Side (Clutch)
0 In Stock | |
Hot Air Elimination Kit
(Reference #32-556)
$104.95 | Rev XP Chassis
Right Side
0 In Stock | |
|
High FlowTM Intake Kit(Reference #HFIK-81000)
For M8 and M1000 Arctic Cats
The stock M8 and M1000 intake is quite restrictive, primarily in the nose of the hood where the air intake tapers down and connects to the bellows. We have eliminated this restriction by increasing the volume of the air intake in this area. This intake kit further maximizes consistency by utilizing two additional vents that are positioned low and forward. These vents draw in cold dense air, even when the upper outside stock intake vents get partially plugged in deep powder snow. It increases midrange power for better throttle response and delivers anadditional 2 horsepower peak.
Instruction Sheet
|  |
| |
High Flow Intake Kit
(Reference #14-299)
$52.95 | M8 2007-10
M1000 2007-08
8 In Stock | |
High Flow Intake Kit
(Reference #14-305)
$52.95 | M1000 2009-10
10 In Stock | |
|
 | Polaris High FlowTM Intake Kit(Reference #INTAKEKIT)
The high flow intake kit converts the top of your airbox to increase intake air velocity. This gives more available air volume into the airbox improving atomization efficiency of fuel in turn improving throttle response and delivering and additional 3 hp peak. Good improvement for stock sleds, mandatory for modified ones.
|
| |
Intake Kit
(Reference #14-107)
$43.95 Instruction Sheet | Edge XC 2000-02
10 In Stock | |
Intake Kit
(Reference #14-115)
$43.95 Instruction Sheet | Edge XC 2003-05
Edge RMK & Pro X/X2/XR '02-05
600 HO IQ 2006-09 (Carb)
28 In Stock | |
Intake Kit
(Reference #14-123)
$40.95 Instruction Sheet | 600 HO, 700 HO Cleanfire 2007-09
800 HO 2008-09
19 In Stock | |
|
High FlowTM Intake Kit(Reference #HF-INTAKE130)
For Polaris 600/700/800 Edge
This High Flow Intake Kit maximizes air flow through the hood and into the engine. It utilizes a Powder Snow Pre-Filter Kit, High Flow Air Horn Kit and two Snap-In Style Flow Rites.
|  |
| |
High Flow Intake Kit
(Reference #14-130)
$117.95 | XC Edge 2000-02
2 In Stock | |
High Flow Intake Kit
(Reference #14-131)
$117.95 | XC Edge 2003-05
Pro X & RMK 2002-05
4 In Stock | |
|
 | High FlowTM Intake Kit(Reference #HF-INTAKE126)
For Polaris 600/700/800 H.O.
This High Flow Intake Kit maximizes air flow through the hood and into the engine. It utilizes a Powder Snow Pre-Filter Kit, High Flow Air Horn Kit and Flow Rites (Four 2" snap-in style in #14-126 & 14-127 and one 2 1/2" in #14-128)
|
| |
High Flow Intake Kit
(Reference #14-126)
$154.95 | 600 HO Carb 2006-09
4 In Stock | |
High Flow Intake Kit
(Reference #14-127)
$151.95 | 600, 700 CFI 2007-08
(except '08 700 RMK)
2 In Stock | |
High Flow Intake Kit
(Reference #14-128)
$85.95 | 700, 800 CFI RMK 2008
All IQ Models 2009-10
(except Touring, FST and 550/600 Shift Short Track & Rush)
0 In Stock | |
High Flow Intake Kit
(Reference #14-140)
$113.95 | Same as #14-128
listed above only this one includes the #14-135 upper dash vent
3 In Stock | |
|
High Flow Intake Kit(Reference #HFIK-REV)
FOR REV CHASSIS
The REV's air intake is restrictive and because of its placement it is prone to plugging with powder snow and ice. This High Flow Intake kit doubles the intake surface area for added air flow to the engine. A powder snow pre-filter repels snow and water, reduces the tendency of powder snow and ice plugging by shedding the snow rather than allowing it to build up.
Instruction Sheet
|  |
| |
High Flow Intake Kit
(Reference #14-119)
$85.95 | Rev Chassis
(EXCEPT RT MODELS)
2 In Stock | |
High Flow Intake Kit
(Reference #14-129)
$66.95 | Rev XP Chassis
3 In Stock | |
|
 | High FlowTM Air Horn Kit(Reference #HF-AIRHORN)
This High FlowTM Air Horn Intake kit provides more airflow to your engine, which improves throttle response, peak horsepower and running consistency. A good improvement for stock sleds, mandatory for modified ones.
|
| |
High Flow Air Horn Kit
(Reference #14-292)
$32.95 Instruction Sheet | F Chassis
16 In Stock | |
High Flow Air Horn Kit
(Reference #14-291)
$36.95 Instruction Sheet | M Chassis
(pictured)
16 In Stock | |
|
Hot Air Venting Kit(Reference #VENT-KIT)
Reduces under hood heat by up to 30 degrees
Allows air to enter in & exit out the back
Screens sit low on the body so air will pass through the clutch and exhaust compartment
Most venting holes must be cut out
All screens are black powder coat painted
Kit includes special mounting rivits for screens
|  |
| |
|
| Arctic Cat Venting Kit |
Hot Air Venting Kit
(Reference #200-268)
$94.95 Instruction Sheet | M-Series 2005-10
Vent Kit - 3 Screens
2 In Stock
| |
Hot Air Venting Kit
(Reference #200-269)
$118.95 | M-Series 2005-10
Side Kit - 2 Screens
3 In Stock
| |
|
| Polaris Venting Kit |
Hot Air Venting Kit
(Reference #200-271)
$118.95 Instruction Sheet | IQ, RMK & Switchback 2005-10
Vent Kit - 4 Screens
2 In Stock
| |
Hot Air Venting Kit
(Reference #200-272)
$56.95 Instruction Sheet | IQ, RMK & Switchback 2007-10
Back Kit - 2 Screens
1 In Stock
| |
|
| Ski-Doo Venting Kits |
Hot Air Venting Kit
(Reference #200-274)
$118.95 Instruction Sheet | REV 2003-07
Vent Kit - 4 Screens
0 In Stock
| |
Hot Air Venting Kit
(Reference #200-275)
$118.95 Instruction Sheet | REV XP 2008-10
Vent Kit - 4 Screens
5 In Stock
| |
|
| Yamaha Venting Kits |
Hot Air Venting Kit
(Reference #200-276)
$118.95 Instruction Sheet | Apex 2006-10
Vent Kit - 4 Screens
0 In Stock
| |
Hot Air Venting Kit
(Reference #200-277)
$118.95 Instruction Sheet | Phazer 2007-10
Vent Kit - 4 Screens
1 In Stock
| |
Hot Air Venting Kit
(Reference #200-278)
$118.95 Instruction Sheet | Nytro 2008-10
Vent Kit - 4 Screens
0 In Stock
| |
|
Power Pack(Reference #201-220)
FOR POLARIS WITH KEIHIN CARBS. The Power Pack maximizes your power from engagement to top end by utilizing new technology through a series of venturi dividers placed in the carburetor to increase air velocity at different throttle positions. This increased velocity results in better fuel atomization which in turn delivers instant throttle response, improved low end through midrange horsepower and improves fuel economy. Easy to install and tune.
5 In Stock
$61.95
|  |
| |
|
 | XP/XR Chassis Support Brace(Reference #183-XPXR)
Any knowledgeable clutch tuner will tell you that heat is the enemy of clutches and belts and eliminating it will help performance and longevity of clutching components and those expensive belts! Another often overlooked issue when the secondary tower flexes is the added side load on the chain case bearing and the side plates of the drive chain--again causing more friction which robs more horsepower, add all of this up and every little bit of friction that you can reduce will add up to increased horsepower at the track! This product does not only save on the belts, chassis, and increase hp, the installation will only take 10 minutes. There is no drilling, cutting or modifying your chassis to accept the new chassis brace.
|
| |
Support Brace
(Reference #183109)
$178.95 | XP Chassis
(except E-Tech)
1 In Stock
| |
Support Brace
(Reference #183110)
$178.95 | XP Chassis
E-Tech Models
1 In Stock
| |
Support Brace
(Reference #183111)
$208.95 | XR Chassis
1 In Stock
| |
|
Engine Stabilizer Kit(Reference #23-ESK)
Hold your engine securely in place with this Engine Stabilizer Kit. This kit combines a Torque Arm and Push Arm to ensure proper engine alignment for maximum performance and consistency. The Torque Arm mounts on the PTO (clutch) side of the engine in the electric start mounting holes and pulls to the bulkhead. The Push Arm mounts on the MAG (recoil) side of the engine and pushes from the bulkhead to the recoil housing. Not compatible with electric start Polaris models.
|  |
| |
Engine Stabilizer Kit
(Reference #23-66)
$135.95 | 900 Twin IQ 2005
11 In Stock | |
Engine Stabilizer Kit
(Reference #23-67)
$135.95 | 700 (755) IQ 2006
4 In Stock | |
|
 | Super Link(Reference #SUPERLINK)
Best torque link available. State-of-the-art aluminum dampened torque link holds clutch alignment during hard acceleration. It increases belt life, belt performance and transmits less vibration than solid links.
|
| |
Super Link
(Reference #900-557)
$76.95 Instructions | 97-01 Polaris Indy 800/700/600, XC, SKS, RMK Twins
4 In Stock
| |
Super Link
(Reference #900-559)
$76.95 Instructions | 96 Polaris Ultra & XCR 600 Special
99-01 XCR 700 & 800
20 In Stock
| |
Super Link
(Reference #900-554)
$54.95 | 01 Polaris Edge Chassis - XC440/500/600
5 In Stock
| |
Super Link
(Reference #900-564)
$79.95 | 02-05 Polaris 600 Edge XC / RMK (small block) except Pro-X
2 In Stock
| |
Super Link
(Reference #900-563)
$79.95 | 02-05 Polaris 700, 800 Edge XC / RMK / Switchback (big block)
9 In Stock
| |
Super Link
(Reference #900-566)
$79.95 | 2002-04 700, 800 Pro X, X2, XR
7 In Stock
| |
Super Link
(Reference #900-553)
$84.95 | Ski-Doo REV Chassis w/twin cyl engine
4 In Stock
| |
Super Link
(Reference #900-561)
$99.95 | 01-04 Arctic Cat 800, 900 ZR, ZL, Mtn Cat
11 In Stock
| |
|
 | Engine Torque Arm(Reference #900-838)
Fits 583-670 Formula Z, 670 Summit and Summit X. Not for reed valve twins. You experience better performance with the clutches in alignment. The Torque Arm holds the engine in place to have consistent belt alignment. Less belt and clutch wear is also a benefit. The arm is equipped with a damper to avoid transmitting vibration into the chassis.
Instruction Sheet
2 In Stock
$32.95
|
| |
|
Engine Push Arm - Polaris(Reference #PUSHARM)
The high torque of the new twins create an undesirable movement of the engine. With the use of these push arms, the engine and clutching stays where you want it without increasing vibration.
|  |
| |
Engine Push Arm
(Reference #900-830)
$45.95 | '97-02 GEN II CHASSIS
(pictured)
2 In Stock | |
Engine Push Arm
(Reference #900-832)
$45.95 | '00-05 EDGE CHASSIS
(Except 600)
7 In Stock | |
Engine Push Arm
(Reference #900-834)
$45.95 | '02-04 PRO-X (Except 600)
4 In Stock | |
Engine Push Arm
(Reference #23-62)
$45.95 | '06-09 600 HO IQ
Carb Models
3 In Stock | |
Engine Push Arm
(Reference #23-63)
$45.95 | '07-09 600 HO CFI
'07-09 700 HO CFI
'07-09 800 HO CFI
5 In Stock | |
|
Side Hiller 2 Lefty Kit(Reference #410-409)
Universal design (will fit 7/8" OEM handlebars)
Extremely easy installation (kit comes pre assembled & there is no modifying necessary).
Smooth and easy to pull like the OEM throttle
Gets full throttle without having the cable adjusted too tight
Parts are CNC machined from billet aluminum
Throttle lever is designed for finger use, but can also be used with your thumb
Sealed cable helps to keep condensation out (prevents freezing)
Throttle lock-out pin (for safer loading onto trailer)
Will work with hand guards.
Click here to see more photos
Instruction Sheet
41 In Stock
$98.95
|  |
| |
|
 | SNOBUNJE "THROTTLE LOGIC" Left-Hand Throttle(Reference #119-992)
Quick-Release cable disconnectEasy installationClamps over hand gripUniversal installationAdjustable cable bracketSnow & ice guardDoes not compromise OEM throttle sensorsIncreases throttle hand positionsReduces throttle hand fatigue
Product Manual
30 In Stock
$156.95
|
| |
|
Throttle Flare - BLACK(Reference #119-990)
Using the Throttle Flare, you will be able to apply a quicker and more consistent throttle response using several new throttle hand positions, greatly improving your ability to apply your body weight where needed in the steering effort. Trail riders will find that the Throttle Flare allows them to bring their thumb back to a normal position and push the throttle lever using the top flare and the ball of their hand. This helps reduce hand fatigue. The Throttle Flare is easly installed using one mounting screw. More Photos
105 In Stock
$12.95
|  |
| |
|
 | Exhaust Valve Pop Up's(Reference #POPUPS)
For Polaris & Ski-DooEasy and quick system to insure proper operation of exhaust valvesExhaust valve engines require cleaning of the exhaust valves on a regular basis. Depending upon oil used, jetting and type of riding, valve maintenance may be needed at 500 to 2000 milesSmall, CNC machined plug fits over exhaust valve using stock components. When engine is run on stand, Pop-Up Plug will pop up when exhaust valves open. If plugs do no pop up smoothly and in sync, maintenance is dueAllows quick visual checks of improperly working valves to prevent engine damageValves that move freely and are in synchronization guarantee better throttle response, better mileage, and more horsepowerSimple installation with hand toolsFor exhaust valve engines only
Installation Instructions
|
| |
Exhaust Valve Pop Ups
(Reference #911-003)
$18.95 | SKI-DOO TWINS
6 In Stock
| |
Exhaust Valve Pop Ups
(Reference #911-006)
$18.95 | POLARIS TWINS '00-04
8 In Stock
| |
|
TPI Valve - Total Performance Intake(Reference #TPIVALVE)
The TPI Valve is designed to increase air flow into your air box and carburetors. This is one of the fastest and easiest ways to increase performance. The patent pending TPI Valve is totally adjustable, allowing you to determine exactly how much to increase air flow. We call this "air jetting". Air passing through the TPI Valve is filtered by an internal filter in the TPI Valve. Easy to use and install, the TPi Valve is 1 1/2" diameter and 1 1/2" high. One valve recommended per 200cc.
|  |
| |
TPI Valve
(Reference #201-219)
$37.95 | PAIR
4 In Stock
| |
|
 | TPI Valve Low Boy(Reference #LOWBOY)
Same as TPI Valve above, however the Low Boy is 2 5/8" square and mounts flush on the airbox. Sold individually.
|
| |
Low Boy
(Reference #201-215)
$18.95 | BLACK
32 In Stock
| |
|
 | Upper Dash Vent(Reference #14-135)
For Polaris IQ Models
This vent provides an additional 30% surface area to increase the amount of air available to the engine on stock or modified sleds. It is highly recommended when riding in powder snow conditions. It features an attractive plastic grate which utilizes a special pre-filter material that repels snow and water yet maintains high airflow.
4 In Stock
$28.95
|
| |
|
Footwell Vents(Reference #32-552)
For Polaris 2007-10 RMK RAW Chassis
This Footwell Vent Kit helps to remove hot underhood heat from the chassis. These vents reduce the chance for performance loss due to heat saturation for a more consistent running engine. They are installed just above the footwells and are sold as a set, one right and one left hand vent.
7 In Stock
$64.95
|  |
| |
|
 | Side Panel Vent Kit(Reference #20050)
Arctic Cat
Allows hot under hood air out without allowing snow in. Right and left sides. Easy installation.
Fits: M Series and Crossfire models 2005-10
0 In Stock
$56.95
|
| |
|
Flow-Rite(Reference #14-258)
FOR SPEEDO OR TACH HOLE. This 4" pre-filter was designed to replace the speedometer to allow more cold air flow into the intake tract for more air box feed. Made with a powder snow pre-filter that repels snow and water, yet passes air right through. Requires 4 1/2" hole for installation.
25 In Stock
$32.95
|  |
| |
|
Flow-Rite Intake Kits(Reference #14-FLOWRITE)
Eliminate air intake restrictions by installing the Flow-Rite in the dash or intake tract for more air box feed. The Flow-Rite is supplied with a powder snow pre-filter that repels snow and water, yet passes air right through. A must for modified sleds. Sold individually. These 2 are made using a rubber flange to attach the Flow-Rite to the surface that it is being installed in. This rubber flange conforms itself to a wide variety of contoured, shaped and textured surfaces for a universal mounting system.
|  |
| |
Flow-Rite Intake Kit
(Reference #14-189)
$18.95 Instruction Sheet | 2 1/2" ID x 3 5/8" OD
(Required Hole Size = 3 1/8")
48 In Stock | |
Flow-Rite Intake Kit
(Reference #14-194)
$18.95 Instruction Sheet | 2" ID x 2 11/16" OD
(Required Hole Size = 2 3/8")
79 In Stock | |
|
 | Flow-Rite Intake Kit(Reference #14-197)
Same as Flow-Rite Intake Kit above except this one is designed for ease of installation on flat or nearly flat surfaces. It requires a 2 1/2" size hole saw which is readily available from any hardware store. Installatin is a snap: hole saw the hole (2 1/2" hole required), debur the edges, clean hole saw shavings and snap Flow-Rite into place. 2" ID x 2 3/4" OD. Sold individually.
Instruction Sheet
143 In Stock
$18.95
|
| |
|
 | BullsEye Air Intakes(Reference #BULLS-EYE)
D&D's Bullseye Air Intakes are great for any air box; snowmobile or ATV. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases, adding performance parts such as pipes, reeds or big bores makes the stock air box insufficient. By adding the Bullseye Air Intakes, you can greatly improve air flow. The intakes come in a package of six.
|
| |
BullsEye Air Intakes
(Reference #201-224)
$40.95 | Black
11 In Stock | |
BullsEye Air Intakes
(Reference #201-225)
$40.95 | Orange
3 In Stock | |
BullsEye Air Intakes
(Reference #201-226)
$40.95 | Green
0 In Stock | |
|
High Flow Outside Draw Conversion Kit(Reference #14-CONVKIT)
Transform your stock air box into a high flowing, cold air drawing horsepower enhancing intake system. Features include:Increases air intake surface area by 30% allowing more airflow to engineAttractive brushed aluminum intake grate that mounts to your hoodUnique filter material keeps powder snow and water out of the air boxCold air draw to provide more dense oxygen rich air to the engineWill not plug easily in deep powder snow conditionsShifts stock toolbox and CDI forwardEasy installationFOR CARB MODELS ONLY!
$104.95
|  |
| |
Conversion Kit
(Reference #14-206)
$109.95 Instruction Sheet | '01-02 800 ZR, ZL & MTN CAT
'03-06 900 ZR
4 In Stock | |
Conversion Kit
(Reference #14-261)
$79.95 Instruction Sheet | '04-06 900 MTN CAT & ZR
2 In Stock | |
|
High Flow Airbox - Outside Air Draw Style(Reference #200-259)
FOR 1997-01 600 (non VES), 700 & 800 TWINS, XC, SKS & RMK (except Edge chassis models)
Kit adapts to the stock bottom box to increase airflow. 4 hp peak and 5 hp midrange increase.
1 In Stock
$81.95
|  |
| |
|
 | High Flow Air Box Kit(Reference #14-288)
For 2005-06 Polaris 700/900 IQ Chassis
This High Flow Air Box kit increases cold air delivery to the engine by reducing air intake restriction. This increased air flow results in a substantial increase in throttle response, more horsepower and improved running consistency. Not only does it deliver an additional 4 horsepower, but it also sheds an amazing 7-8 pounds of weight. This kit also comes with a new aluminum belt guard that allows air in and around the clutches for cooler running, better consistency and increased belt life. Fusion (not RMK or Switchback)
Instruction Sheet
1 In Stock
$294.95
|
| |
