| | |
 | Dial-A-Jet - The Ultimate Jetting System(Reference #DIALAJET)
Now you can operate your snowmobile in a broad altitude and/or temperature range without having to rejet. Dial-A-Jet fits any style carburetor and works on stock or modified engines, improving performance and fuel economy. Dial-A-Jet comes as a complete kit with easy to follow instructions. Installation is simple, typically about 1 hour.Works great on stock or modified machinesWorks on any style carburetorImproves mileage and throttle responseIncreases horsepower and performanceExcellent burn down protectionA must with after market pipes or engine modificationsEasy installationFOR TWO STROKE ENGINES ONLY
|
| |
Dial-A-Jet
(Reference #201-214)
$119.95 | TWIN CYLINDER ENGINE
2 In Stock
| |
Dial-A-Jet
(Reference #201-211)
$159.95 | THREE CYLINDER ENGINE
1 In Stock
| |
Dial-A-Jet
(Reference #201-213)
$199.95 | FOUR CYLINDER ENGINE
0 In Stock
| |
|
Deep Well Float Bowl Nut(Reference #DJ-NUT)
Will increase float bowl capacity and allow more fuel around the main jet. Good for high performance applications.
|  |
| |
Float Bowl Nut
(Reference #DJ-540)
$9.95 | VM32-38 CARBS
11 In Stock
| |
Float Bowl Nut
(Reference #DJ-545)
$9.95 | VM40-44 CARBS
7 In Stock
| |
|
 | Water Trap Line Adapter(Reference #DJ-560)
Brass size adapter from 3/8" to 1/8" to use a water trap line for Dial-A-Jet pick up.
0 In Stock
$6.95
|
| |
|
Yamaha Bowl Fitting(Reference #DJ-550)
For 1994 and newer Yamaha models with flat slide carbs. Special fitting installs without any drilling or tapping.
1 In Stock
$7.95
|  |
| |
|
 | Remote Mount Kit(Reference #DJ-505)
The remote mount kit is designed to access areas on your carburetor that lack the room to install the Dial-A-Jet body. The mount kit mounts your Dial-A-Jet bodies on the air box above the carburetors. This allows the air box to fit normally, yet gives you the advantages of using a Dial-A-Jet Automatic Fuel Induction System. Kit comes with stainless steel mounting bracket, remote delivery tube, fuel line, all necessary hardware and instructions.
0 In Stock
$9.95
|
| |
|
 | Dial-A-Jet Dually Kit(Reference #DJDUALLY)
The Dually Kit is recommended for carburetors 38mm and up, especially on high horsepower machines that move a lot of air (CFM) through the carbs.Peak horsepower at all timesInstant throttle responseFast and easy tuningImproved fuel mileage 5% to 15% or moreBullet proof design with no moving parts or electronicsDUALLY KITS ARE BASED ON TWO DIAL-A-JETS PER CARBURETOR.
|
| |
Dually Kit
(Reference #DJ-210-2)
$199.95 | TWIN DUALLY
4 In Stock
| |
Dually Kit
(Reference #DJ-211-2)
$288.95 | TRIPLE DUALLY
0 In Stock
| |
|
Pro Mount Kit(Reference #201-216)
To update the early nylon strap mounting style to the current screw in style. Kit includes threaded brass tube and mounting pad.
Installation Instructions
0 In Stock
$9.95
|  |
| |
|
 | Snorkel Kit(Reference #201-217)
The "Snorkel" fits snugly over the top of the Dial-A-Jet, routing the air feed hose up the steering post to the handlebar pad area. This allows the Dial-A-Jet to use outside air at atmospheric temperature and pressure for increased performance. The Snorkel also eliminates any possible problems caused by powder snow under the hood. This kit retrofits all Dial-A-Jets. Snorket kit includes snorkel boot, vent line, air filter and zip ties.
6 In Stock
$9.95
|
| |
|
Mounting Bracket(Reference #DJ-BRACKT)
FOR LIMITED SPACE INSTALLATIONS. Makes it easy to mount Single or Dually Dial-A-Jets no matter how close your airbox is to your carburetors. Constructed from tough corrosion proof, fuel resistent Delrin with stainless steel adjuster screw. Fits 36mm through 44mm Mikuni and Keihin carburetors. One required per carb. Also requires 1 XXL fuel delivery tube per carb.
|  |
| |
Mounting Bracket
(Reference #DJ-530)
$9.95 | 36 TO 39MM
1 In Stock
| |
Mounting Bracket
(Reference #DJ-535)
$9.95 | 40 TO 44MM
1 In Stock
| |
XXL Delivery Tube
(Reference #DJ-500XL)
$9.95 | XXL DELIVERY TUBE
1 In Stock
| |
